FAQ for OGG WAV Converter

Free Download OGG WAV Converter

OGG WAV Converter converts between OGG to WAV and WAV to OGG, and resamples OGG files. It's an ALL-IN-ONE audio converter that supports more than 90 audio and video files as input, and keeps ID3 tag when converting. The converter also supports batch conversion.

You can follow instructions below to get started.

1. Choose OGG/WAV files;
2. Choose target format;
3. Click Convert;
4. Done.

For more detailed instructions, please click here.

The program supports the following files.

• Input Files: 3G2, 3GP, 3GP2, 3GPP, 4XM, AAC, AC3, ADTS, ADX, AFC, AIF, AIFC, AIFF, ALAW, AMR, AMV, APE, ASF, AU, AVI, AWB, CAF, CDA, CDATA, CIF, DIF, DIVX, DNXHD, DRC, DTS, DV, DVD, DVR-MS, DXA, EAC3, FLAC, FLC, FLI, FLIC, FLV, FLX, GSM, GXF, H261, H263, H263+, H264, IT, KAR, M1A, M1V, M2A, M2T, M2TS, M2V, M4A, M4B, M4R, M4V, MID, MIDI, MJ2, MJPEG, MJPG, MKA, MKV, MLP, MLV, MMF, MO3, MOD, MOV, MP+, MP1, MP2, MP3, MP4, MPA, MPC, MPE, MPEG, MPG, MPGA, MPP, MPV, MTM, MTS, MTV, MVI, MXF, NSA, NSV, NUT, NUV, OGA, OGG, OGM, OGV, OGX, OMA, PSP, PSX, PVA, QCIF, QCP, QT, RA, RAM, RCV, RGB, RM, RMI, RMVB, ROQ, RPL, S3M, SDP, SHN, SMK, SND, SOL, SOX, SPX, STR, SWF, THD, TS, TTA, UMX, VC1, VFW, VID, VMD, VOB, VOC, VQF, W64, WAV, WAVE64, WEBM, WM, WMA, WMD, WMV, WV, XA, XM, XVID, XWMV, Y4M, YUV
• Output Files: 3G2 (audio track), 3GP (audio track), AAC, AAC for iPod/iPhone/iPad/iTunes/DSi, AC3, AIFF, ALAC (Apple Lossless), AMR, ASF (audio track), AU, AVI (audio track), CAF, DTS, FLAC, FLV (audio track), M4A (MPEG-4 audio), M4B (MPEG-4 audiobook), M4R (iPhone ringtone), MKA, MMF, MOV (audio track), MP2, MP3, MP4 (audio track), MPA, OGG, SWF (audio track), VOC, WAV, WMA, WMV (audio track)

Yes, it does.

There are 3 ways below.

1. Click "Add Files" button, choose one or more files and then click Open;
2. Click "Add Folder" button, choose a folder, then the program will search all OGG, MP3, and WAV files within the folder and add them;
3. Drag and drop several OGG, MP3, and WAV files or folders onto the program main window, then it add all selected files and all support files within selected folders and subfolders.

Just 2 or 3 steps below.

1. Choose OGG files and add to conversion list;
2. Choose "to WAV" at output format;
3. Click "Convert".

Just 2 or 3 steps below.

1. Choose WAV files and add to conversion list;
2. Choose "to OGG" at output format;
3. Click "Convert".

Just 3 steps below.

1. Choose OGG files and add to conversion list;
2. Set OGG encoding parameters (e.g. sample frequency, bit rate, channels) and ID3 tag on Options dialog;
3. Choose "to OGG" at output format
4. Click "Convert" button.

The software supports the following encoding parameters for OGG.

• Codecs: supports Vorbis OGG Encoder and FLAC (Free Lossless Audio Codec)
• Sample Frequency: supports 8000 Hz, 16000 Hz, 22050 Hz, 24000 Hz, 32000 Hz, 44100 Hz, 48000 Hz, 88200 Hz, and 96000Hz.
• Bit Rate: supports 8 kbps, 16 kbps, 24 kbps, 32 kbps, 40 kbps, 48 kbps, 56 kbps, 64 kbps, 80 kbps, 96 kbps, 112 kbps, 128 kbps, 144 kbps, 160 kbps, 192 kbps, 224 kbps, 256 kbps, 320 kbps, 400 kbps, and 480 kbps..
• Channels: supports stereo and mono.

The software supports the following encoding parameters for WAV.

• Codecs: PCM 8-bit, PCM 16-bit, PCM 24-bit, PCM 32-bit, PCM 32-bit Float, PCM 64-bit Float, CCITT a-Law (8-bit), CCITT mu-Law (8-bit), Microsoft ADPCM (4-bit), IMA ADPCM (4-bit), G.726 ADPCM, Yamaha ADPCM (4-bit), Microsoft GSM, and LAME MP3 (MPEG audio layer 3)
• Sample Frequency: supports 6000 Hz, 8000 Hz, 11025 Hz, 12000 Hz, 16000 Hz, 22050 Hz, 24000 Hz, 32000 Hz, 44100 Hz, 48000 Hz, 88200 Hz and 96000 Hz
• Channels: supports mono and stereo

Sure. You need to set an option before converting.

1. Click "Options" and switch to tab "General"
2. Set a number at "Output Volume". The number is described below.
• < 100% - Decrease volume
• = 100% - No changes
• > 100% - Increase volume
For example:

• 50%: Decrease volume to half of original file
• 200%: Increase volume to double volume of original file
3. Convert your file
4. Done

Yes, you can. You should click "Options" -> "ID3" tab and check "Add ID3 tag", and then edit the custom ID3 tag information.

At "Title" field, if you check "Name as file name (not include extension)", the program will set Title as file name when converting. For example: original file name is "Happy New Year.ogg", and then the title will be set as "Happy New Year" automatically.

Yes, it is. You may click "Options" -> "Output Options" tab -> "Output Folder" section, choose "Specify output folder" at "Output Folder" combo-box and click "Browse" button to choose an output folder.

Yes, it is. Like question above, but you should check "Create folders according to path of source file", thus the program will create folders according to path of source file.

For example: Original file is "C:\Music\pop\test.ogg" and output folder is "D:\Output." If the option is checked, the output folder will be "D:\Output\C\Music\pop."

We partner with FastSpring, who processes our orders. FastSpring accepts payment by credit cards (Visa, MasterCard, American Express, Discover, and JCB), bank transfer, check, and money order.

Click here to order the program online

You will receive an email confirming your order shortly after placing an order. Then, within 24 hours, you will receive the second email with your registration code, and instructions to get started!

Please send your additional questions to <support at hootech.com>.

Top